Industrial Primer

Approx. Rs 125 / LitreGet Latest Price

Product BrochureProduct Details:

Chamak Quick Set Red Oxide Prime Based on special Synthetic resin and anti corrosive pigment is ideally suitable where fast drying is required. The film dries hard Quickly Forming a good touch coat. Notable Special Feature of This prime is that one can use either enamel System N. C System for Subsequent coats


Other Details:

• Recommended Use: Applicable for ferrous substrate on Cars, scooters, transport vehicles etc. For new fabrication work and maintenance work where quick drying is essential.
• Covering Capacity: For Smooth M.S. surface: approx 14 sq. m / lit per coat @ 20 micron DFT, depending on surface and spaying loss
• Direction For Use: Remove dust, oil, grease, etc, from the surface to be coated. Prior degreasing & derusting can also be done. Apply CHAMAK Quick set RIO primer by brush or spray, use recommended thinner for desire viscosity. Allow primer coat to hard dry. Sand the primer coat with sand paper and apply subsequent coats.

Approx. Rs 90 / LitreGet Latest Price

Product BrochureProduct Details:

Red Oxide Metal Primer Is most Economical Primer. it has good Adhesion and gives fairly good corrosion to metal. it can be brushed or sprayed.



Other Details:

• Covering Capacity:For Smooth M.S Surface: Approx 14 SQ.M/Lit per coat @ 20 micron DFT, Depending on Surface and Spaying LOss

Approx. Rs 200 / LitreGet Latest Price

Product Details:

Other Details:

• Mixing Ratio By Volume Base: Hardener 3:1

Approx. Rs 175 / LitreGet Latest Price

Product Details:

Approx. Rs 250 / LitreGet Latest Price

Product BrochureProduct Details:

It is two pack Polyurethane composition This Prime provide higher degree of protection from corrosion than conventional and durable, especially in highly corrosive conventional painting System

Approx. Rs 200 / LitreGet Latest Price

Product Details:

It is two pack air drying epoxy composition with Red Oxide and Epoxy Zinc Phosphate Primer. This primer provide higher degree of protection from corrosion than conventional primer, especially in highly corrosive environment. The primer can be overcoated with conventional painting system, chlorinated rubber and epoxy.

Approx. Rs 200 / LitreGet Latest Price

Product Details:

Covering Capacity of Smooth Mild Steel Surface:

• 10 to 11 sq. mt. / lt. for 25 micron dry film thickness.

Direction for Use:

• Ensure that surface should be free from rust, grease, oil, moisture and other loose flakes. Apply by brush or spray after adjusting to brushing or spraying viscosity by recommended thinner. Allow the primer coat to hard dry before applying finishing coat. Stir well before use. For galvanised steel and non, ferrous metals pretreat with Wash Primer, followed by one coat of Chamak Zinc Chromate Primer.

Approx. Rs 100 / LitreGet Latest Price

Product Details:

1651 Chamak Synthetic Zinc Phosphate Grey Primer is based on syn. Resin. & Anticorrosive pigments. It is ideal for new, pickled, abrasive blasted of slightly rusted steel in production and steel fabricating operations. It is also suited for maintenance or new construction work where fast drying is desired. It is formulated especially for spray application, but may be applied by brush. It dries hard to form a good tough coating. Special feature of this primer is NC base primer & Putty can be applied after hard drying of the primer.


Direction For Use:

• Remove dust, oil, grease, moisture, rust & other loose flakes etc. Apply CHAMAK Auto Primer Brown by adjusting the viscosity with recommended thinner for brushing or spraying. Allow primer coat to hard dry. Sand the primer coat with sand paper & apply subsequent coat. Stiff well prior to use.