Send Email
Send SMS
Search
Chamak Paint Industries
Chamak Paint Industries


Automotive Coatings

Prominent & Leading Manufacturer from Ahmedabad, we offer polyurethane automotive coating, n.c. thinner and nc auto primer brown.

Polyurethane Automotive Coating

REQUEST CALLBACK

Polyurethane Automotive Coating
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
FinishSmooth & glossy
Flash PointAbove 25deg F
Packing20 Lit, 4 Lit, 1 Lit
ColourWhite, Black, Cream, Green, Gray , Red, etc
Covering Cap acity on Smooth Mild Steel Surface10 to 12 sq. mt/ltr. for 30 micron dry film thickness
Mixing RatioBase to Hardner 3:1 by volume
Thinner RecommendedChamak N.C. Thinner
Application ViscosityFor brushing -25 ot 30 sec. by FC -4 & 75deg F, For spraying -20 -25 sec. by FC-4 30def F
Curing Time30 Minutes
Drying TimeSD approx 30 minutes, HD - approx 12-15 hours, Recoating: after 4 - 5 hours

This is specialised product from CHAMAK in two packs system of Base and hardener. It is formulated in accordance with the latest development in the lacquer industry. It is based on selected Grades of polyurethane, high grade of non oxisidising resin. It is pigmented with high capacity, Light fast pigment to produce high gloss, hard flexible and durable film. It has very Water, Petrol and Lubricating Oil resistance. It has very good rubbing properties and durability.

Direction For Use:
  • Remove dirt / grease / oil / dust. clean the surface properly. ensure that CHAMAK primer sufacer applied over the body has thoroughly dried and has been sanded down properly spray 2 to 3 coats. Now take out CHAMAK base and hardner mix them in 3:1 ratio (by volume) let the mixture stand for 30 minutes for cure. NowApply by brush or spray using recommended thinner use the mixture within 4 hours.


Recommended Use:

  • It is used for auto mobiles, two-wheelars, transport vehicles and engineering goods, fans, refrigators, machineries etc
    Yes! I am interested

    N.C. Thinner

    REQUEST CALLBACK

    N.C. Thinner
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Flash PointAbove 25deg C (75deg F)
    ColourWater White
    Specific Gravity0.85 + 0.02at 30deg C
    Recommended ForFor thinning Chamak Automotive Paints, Primer Surfacer and Putty
    Packing20 Liters, 10 Liters, 5 Liters, 4 Liters

    It is added in chamak NC Lacquer automative paints to obtain a consistency suitable for application. As a general rule thinning should be kept at a minimum as the quality of the paint work will suffer from tolerable thinning. This thinner is blended to give the best results with regard to spray finishing properties etc
    Yes! I am interested

    NC Auto Primer Brown

    REQUEST CALLBACK

    Product Price :Get Latest Price

    Product Details:

    FinishSmooth & matt
    Packing20 Litres, 4 Litres. 1 Litre, 500 mls
    ColourBrown
    Covering Capacity on Smooth Mild Steel SurfaceDry film thickness depending upon surface and normal spraying loss
    Drying TimeSurface Dry - Less than 30 minutes, Hard Dry - Less than 16 hours, Overcoating time Minimum 8-10 h
    Flash PointAbove 24deg C (75deg F)
    Thinner RecommendedN. C. Thinner No. 111/199
    Application ViscosityBrushing - 50 to 60 sec. at 30 C by F.C. No.4, Spraying - 30 to 35 sec. at 30 C by F.C. No.4
    Method of ApplicationBy brush or spray at a pressure of 40 to 50 P .S.I.
    Subsequent CoatChamak Enamels, Chamak P.S. Grey, Chamak Putty, etc

    CHAMAK AUTO Primer Brown is based on syn. Resin. & Anticorrosive pigments. It is ideal for new, pickled, abrasive blasted of slightly rusted steel in production and steel fabricating operations. It is also suited for maintenance or new construction work where fast drying is desired. It is formulated especially for spray application, but may be applied by brush. It dries hard to form a good tough coating. Special feature of this primer is NC base primer & Putty can be applied after hard drying of the primer.

    Recommended Use:
    • It is applied on ferrous substrates. On transport vehicles, cars, scooters body, maintenance & New construction work where fast drying is desired

    Direction For Use:
    • Remove dust, oil, grease, moisture, rust & other loose flakes etc. Apply CHAMAK Auto Primer Brown by adjusting the viscosity with recommended thinner for brusing or spraying. Allow primer coat to hard dry. Sand the primer coat with sand paper & apply subsequent coat. Stiff well prior to use.


    Yes! I am interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Chamak Paint Industries
    Dharmendra Kanani (Sales Head)
    Thakkarbapa Nagar, National Highway No. 8 Block No. 1471,
    Ahmedabad - 382350, Gujarat, India
    Call Us: 
    Call Response Rate: 89%
    Share Us :
    F G T L



    Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us

    © Chamak Paint Industries. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Chamak Paint Industries